ALLU CRUSHER SERIES
EFFICIENT IN EVERY SITUATION
The ALLU Crusher is a series of crushing attachments designed for excavators from 10-33 tons. The series includes 3 different models, designed to crush a variety of materials directly on-site.
BETTER FOR YOU
BETTER FOR THE ENVIRONMENT
Maximum productivity
- Increase your excavator utilization rate
- Easy to handle, even in tight and limited areas
- No need for logistics or permissions
- Quickly to put into operation
- Easy to change fragment size
Robust, practical design
- Can be run in reverse to reduce vaulting and jamming
- High torque motors enable start up with a full load
- Opens like a clam for safe and easy replacement of upper jaw
Environmentally friendly
- Less material sent to landfills meaning less expenditure
- Reduce pollution through decreased transportation and fuel costs
Crusher Features

1. Main frame
2. Upper jaw – safe and easy to replace
3. Crushing plates – allow material to flow freely through jaws
4. Streamline wear resistant frame – no external parts for long lasting operational life
5. Angled side and tip plates – provide a rigid frame, reduce the wear and provide a higher crushing filling rate
6. Pin adjustable – for quick fragment size changes
7. Protected belt drive – maintenance free no adjustment
Technical specifications
Excavator (5 / US ton) | 8-11 / 9-12 |
Weight (kg / lbs) | 1400 / 3090 |
Operating Pressure (bar / ksi) | 250 / 3600 |
Max. Operation Flow (l/min / gpm) | 80 / 21 |
Loading Capacity (m3 / yd3) | 0.35 / 0.46 |
Crushing Cam Opening (mm / in) | 260 / 10 |
Output Size Regulation (mm / in) | 0-16 to 0-200 (0-5/8 to 0-8) |
Excavator (t / US ton) | 10-14 / 11 – 15 |
Weight (kg / lbs) | 1740 / 3840 |
Operating Pressure (bar / ksi) | 250 / 3600 |
Max Operation Flow (l/min / gpm) | 95 / 25 |
Loading Capacity (m3 / yd3) | 0.35 / 0.46 |
Crushing Cam Opening (mm / in) | 370 / 14.6 |
Output Size Regulation (mm / in) | 0-16 to 0-200 (0-5/8 to 0-8) |
Excavator (t/US ton) | 15-22 / 17-24 |
Weight (kg / lbs) | 2465 / 5440 |
Operating Pressure (bar / ksi) | 250 / 2600 |
Max. Operation Flow (l/min / gpm) | 160 / 42 |
Loading Capacity (m3 / yd3) | 0.5 / 0.65 |
Crushing Cam Opening (mm / in) | 370 / 14.6 |
Output Size Regulation (mm / in) | 0-16 to 0-200 (0-5/8 to 0-8) |
Excavator (t / US ton) | 23-35 / 25 – 39 |
Weight (kg / lbs) | 3820 / 8420 |
Operating Pressure (bar / ksi)2 | 250 / 3600 |
Max. Operation Flow ( l/min / gpm) | 180 / 47 |
Loading Capacity (m3 / yd3) | 1.0 / 1.31 |
Crushing Cam Opening (mm / in) | 370 / 14.6 |
Output Size Regulation (mm / in) | 0-16 to 0-200 (0-5/8 to 0-8) |
Main Application Areas

- Demolition
- Excavation
- Construction

- Utility and Road works
- Concrete Waste Recycling
- Asphalt Recycling

- Waste Rock Handling at quarries
- Concrete Pipe Industry
- Brick and Ceramics Industry
News
Speak to
a specialist
Our Customer Service team will happy to answer your queries or arrange a demo as soon as possible
RELATED PRODUCT
PARTNER YOUR CRUSHER WITH ALLU TRANSFORMER
The ALLU Crusher and ALLU Transformer support each other. Both functions are often needed at the same job site and are complimentary. By pre-screening the material with the ALLU Transformer the capacity of the ALLU Crusher will increase, because the fine material has been screened away. If the material is wet, fine material often tends to clog. This causes jamming and bridging. Furthermore, the quality of the desired end product will significantly improve. Re-use of pre-screened material; can be utilized as fill material.
- One base machine and operator needed
- Low investment costs
- Full mobile solutions to any job site
- Process the fine materials first with the ALLU Transformer and hard materials with the ALLU Crusher. Increase the overall capacity
- Less landfill payments – lower dumping costs